Can Advanced Recycling Reduce India’s Dependence On Virgin Polyester?

By Vaibhav Jha
Polyester now makes up around 59% of global fibre output, some 82.5 million tonnes in 2025. Recycled polyester has grown to 9.7 million tonnes, yet 97% of it still comes from plastic bottles, and textile-to-textile recycling supplies under 1% of all fibre, as mentioned in the Textile Exchange, 2026. India generates about 7.07 million tonnes of textile waste a year, as per the Ministry of Textiles, and more than 70% of that finds some use, but roughly 1.9 million tonnes of post-consumer waste is still landfilled or burned. FICCI–RECEIC puts the unrealised value across reuse and recycling at about US$ 9.4 billion.
The strength & ceiling of mechanical recycling
India’s bottle recycling system is a genuine achievement. An estimated 80% of PET bottles are collected (2021-22 data), and about three-quarters of the washed flake goes into textiles. Mechanical recycling will remain the backbone, and the Ministry’s study envisages a hybrid system, mechanical for scale and chemical for quality.
But the model has a ceiling, as melt processing degrades the polymer and demands clean, mostly clear feedstock, so dyed, blended and elastane-rich fabrics sit largely outside its reach. Downcycled rPET often reaches end of life after a single additional cycle, keeping our textile base tied to virgin petrochemical feedstock. FICCI–RECEIC estimates 1.35 million tonnes of blended fibre waste beyond mechanical routes, and notes India has no commercial chemical recycling capacity yet.
Multilayer polyester packaging faces a harder fate, as PET flexibles were 42% of India’s PET packaging waste in 2021-22. However, few are collected, and those that are, mostly go to cement kilns, forfeiting the polymer’s value. Ester’s patented all-PET laminates, designed as one recoverable material family, and our UCCC (Ultra Clean Crystal Clear) rPET for films respond to that challenge.
Why molecular recycling changes the equation
Glycolysis or methanolysis breaks post-consumer polyester, including dyed, blended and multi-material streams, back into monomers. Purification at that stage removes dyes, finishes and contaminants, and the repolymerised resin can reach virgin-grade quality, so the loop can repeat without the degradation that limits melt recycling. The Ministry’s study sees chemical recycling as the route to true textile-to-textile circularity. Globally.
What the market is signalling
Circularity is currently moving from voluntary goal to market access condition. EU member states must establish textile EPR schemes by April 2028, and since 19 July 2026 large companies cannot destroy unsold apparel and footwear. Industry coalitions are urging that future recycled-content rules favour fibre sourced from textiles rather than bottles. Those rules are still being drafted.
In India, GST on man-made fibre and yarn was cut to 5% in September 2025. Budget 2026-27 introduced the Tex-Eco Initiative, and CPCB’s EPR certificate platform set up in February 2026, is building traceability. India already mandates recycled content in plastic packaging, even multilayer formats.
Other sectors scaled by committing early. For instance, Mercedes-Benz commissioned a hydrometallurgical battery-recycling plant from a joint-venture technology supplier, and H&M’s US$ 600 million offtake with Syre applies the same playbook to polyester.
A benchmark moving to execution
ELITe, Ester’s 50:50 joint venture with Loop Industries, shows the shift under way. In May 2026, it signed an MoU with the Gujarat Government for a ₹1,600 crore facility at Bharuch, designed to produce around 70,000 tonnes of recycled PET resin annually from post-consumer and post-industrial waste, with operations targeted for 2028. Nike is confirmed as anchor customer under a multi-year offtake for Twist circular polyester. The task now is to make such projects the norm.
A roadmap for scale
Back the capital. Bring polyester chemical recycling within Tex-Eco and PLI-type support to give early plants bankability.
Level the field. Having corrected inverted duty on man-made fibre, extend equivalent treatment to sorted textile waste and recycled intermediates.
Share the innovation premium. Early plants face a temporary “class to mass” cost curve, and a modest polymer-stage premium is absorbed across spinning, weaving, processing and retail, so firm offtakes from brands and mills beat waiting for spot-market parity.
Set recycled-content thresholds in apparel. Packaging shows the approach works, as phased, audited thresholds for retail apparel would create durable demand for depolymerisation capacity.
Build the feedstock system. Over 95% of sorting in India is manual, says FICCI–RECEIC. A phased textile EPR with audited textile-derived content, national grading standards and sorting technology would make feedstock dependable.
Manufacturing sovereignty
The fossil age will end not when oil runs out, but when burning or landfilling refined polymers becomes an inefficiency the industry cannot afford. India met 88.1% of its crude requirement through imports in April–September 2026, while the import bill rose 46% to US$ 90.6 billion. Our textile waste is an above-ground feedstock that we already own. Scaling advanced recycling across our textile heartlands can de-link growth from fossil extraction and turn a liability into a lasting competitive advantage.
(Vaibhav Jha is the Chief Executive Officer, Ester Industries)













